Smart House Solution Danmark

Søg på blog

Smart House UWP

FLEXCABLING

Basis Pakker

Ældre Smart House

Information

CO2, Temperatur, Fugt sensor med RGB LED

1

CO2, Temperatur, Fugt sensor med RGB LED

Ved at købe denne vare kan du samle op til 35 loyalitetspoint. Din kurv total 35 point som kan konverteres til en rabatkupon lydende på 17,50 kr.


• Bus-powered CO2, temperature and humidity sensors
• Wall mounting
• CO2 measuring range: 0 to 2000 ppm
• Temperature measuring range: -20 to 50 °C
• Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL
• “Traffic light LED indication” for CO2 level
• Low current consumption
• Easy installation
• Smart Dupline® protocol

Flere detaljer

3 115,00 kr

  • Delbetaling
    291 kr. pr. måned
    Ved et samlet kreditbeløb på 3.115 kr. over 12 mdr.: Månedlig ydelse 291 kr. Samlede kreditomk. 375 kr. Samlet tilbagebetaling 3.490 kr. Debitorrente (fast) 0,00%. ÅOP (forudsat betaling via Mit Sparxpres) 23,77%. Der er fortrydelsesret.

    • Bus-powered CO2, temperature and humidity sensors
    • Wall mounting
    • CO2 measuring range: 0 to 2000 ppm
    • Temperature measuring range: -20 to 50 °C
    • Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL
    • “Traffic light LED indication” for CO2 level
    • Low current consumption
    • Easy installation
    • Smart Dupline® protocol

     

    Product Description

    The SHSUXXXXL line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and definition of CO2 threshold levels are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

    RGB LED

    By means of the SBWEB/SHWEB configuration tool it is possible
    to set the CO2 thresholds (green to yellow and yellow
    to red) to automatically light the LED in green, yellow or red
    colour depending on CO2 level.

    • Til Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
    • Adressetildeling Automatisk. igennem "SIN" (Specifikt Identifikations Nummer) UWP 3.0 og Sx2WEB24
    • Vægt 150 g
    • Fejlsikker tilstand Hvis SH2MCG24 mister kommunikationen med SH2WEB24, slukker Dupline®- udgangen. I den situation vil alle moduler der er tilsluttet bussen gå i den fejlsikre tilstand der er programmeret individuelt med SH-værktøjet.
    • Tæthedsgrad IP20
    • Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
    • Driftstemperatur -20 to +50°C (-4 to +122°F)
    • Lagertemperatur -40 to +70°C (-40 to + 158°F)
    • Fugt (ikke kondenserende) 0 til 90% Rh
    • Datablad / Manual Download datablad / Manual - Klik på fane Download
    • Dimension (h x w x d) 80 x 90 x 26 mm
    • Farve Hvid
    • Information Temperature Signal range -20 to 50 °C
    • Information 2 Temperature Signal range -20 to 50 °C Inaccuracy +/-0,5°C
    • Strømforsyning Forsynet af Dupline®bussen

    Anmeldelser

    Skriv en anmeldelse

    CO2, Temperatur, Fugt sensor med RGB LED

    CO2, Temperatur, Fugt sensor med RGB LED

    • Bus-powered CO2, temperature and humidity sensors
    • Wall mounting
    • CO2 measuring range: 0 to 2000 ppm
    • Temperature measuring range: -20 to 50 °C
    • Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL
    • “Traffic light LED indication” for CO2 level
    • Low current consumption
    • Easy installation
    • Smart Dupline® protocol

    Skriv en anmeldelse

    4 andre varer i samme kategori