CO2, Temperatur, Fugt sensor med RGB LED

• Bus-powered CO2, temperature and humidity sensors
• Wall mounting
• CO2 measuring range: 0 to 2000 ppm
• Temperature measuring range: -20 to 50 °C
• Humidity measuring range: 0 to 100 %RH Only SHSUCOTHL
• “Traffic light LED indication” for CO2 level
• Low current consumption
• Easy installation
• Smart Dupline® protocol

Product Description

The SHSUXXXXL line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and definition of CO2 threshold levels are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

RGB LED

By means of the SBWEB/SHWEB configuration tool it is possible
to set the CO2 thresholds (green to yellow and yellow
to red) to automatically light the LED in green, yellow or red
colour depending on CO2 level.

• Fur Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Adresszuweisung Automatisch: Der Controller erkennt das Modul anhand der SIN (Specific Identification Number, eindeutige Identifikationsnummer) UWP 3.0 og Sx2WEB24
• Gewicht 150 g
• Failsafe-Modus Hvis SH2MCG24 mister kommunikationen med SH2WEB24, slukker Dupline®- udgangen. I den situation vil alle moduler der er tilsluttet bussen gå i den fejlsikre tilstand der er programmeret individuelt med SH-værktøjet.
• Schutz IP20
• Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
• Betriebstemperatur -20 to +50°C (-4 to +122°F)
• Lagertemperatur -40 to +70°C (-40 to + 158°F)
• Luftfeuchtigkeit (nicht-kondensierend) 0 til 90% Rh
• Datenblatt / Bedienungsanleitung Download Datenblatt / Handbuch - klicken Sie auf die Registerkarte Download
• DIM.: (h x w x d) 80 x 90 x 26 mm
• Farbe weiß
• Information Temperature Signal range -20 to 50 °C
• Information 2 Temperature Signal range -20 to 50 °C Inaccuracy +/-0,5°C
• Stromversorgung Geliefert von Dupline®bussen

• DATA_Eng
  
  
• DATA_Eng 2