Installation Wire Dupline and smart House to the blackboard, etc.
1 x 0.5-mm Reel à 200 m PVL
Pink / Pink
Smart House system uses a robust and proven 2-wire bus technology, which ensures a reliable installation. It is important to establish good collections of bus-leaders in tablet and cans. We recommend the use of spring-loaded terminals combined with our 0.5 mm2 cable, available as PVL or 2-wire, for the transmission of a bus signal in the pipes, respectively, or Separate kabel.Installations Wiring Dupline and smart House to the blackboard, etc.
Get in rolls of 200m in colors
Pink / Pink
Violet
SMart House Denmark Wire
Which cable you can use
? 1 - Can you pull plain. lankabel UTP around to all units In principle, yes it can well, you must then be sure to comply with all clearances for wires / cables with other strains in both the board and elsewhere. When using 0.25mm cable such as UTP cable must also worse very sure that this all joints are 100% working, so there should be no loose connections over time
? 2 - If you choose any other cable may then be pulled in the pipes with electric wires or it will interfere with signals on If you pull a cord or cable with Dupline / smart house bus in pipes with other voltages, the wire / cable comply with an isolation capability of the inner conductor of 300 / 500V. Dragging Dupline / smart-house bus along with other voltages not disturb the bus.
We recommend by using our special smart-house wire / cable to the Smart House installations. It has an insulation value of 300 / 500V and admitted to pulling the tube with other voltages. It is 0.5 square solid line, which ensure better links Special colors so it's easier to know, and risk together mixture is minsket
Cable Smart House = 200 meter roll with 2 X 0.5 leaders Wire Pink = 200 meter roll with 1 X 0.5 leader Cord Violet = 200 meter roll with 1 X 0.5 leader