Keypad

• smart-house keypad for building access control and alarm control
• Indoor or outdoor applications
• Three programmable LEDs
• Built-in buzzer
• Power supply: 12VDC

White frame, black and white foil included

USER MANUAL  DATASHEET 

Product Description

This keypad can be used to control several events in the building, e.g. alarm arming/ disarming including zone alarm, doorbell, switching of appliances, etc. It is part of the smart-house concept and can be used with all the functions supported by the smart-house controller.

Mode of Operation

Wiring Diagram Dimensions General Specifications (cont.) Red Black Yellow Blue BACCKEYPAD- DC 50 130 8 Number of wires 4-wire cable, 8 m length CE Marking Yes EMC Immunity EN 61000-6-2 - Electrostatic discharge EN 61000-4-2 - Radiated radiofrequency EN 61000-4-3 - Burst immunity EN 61000-4-4 - Surge EN 61000-4-5 - Conducted radio frequency EN 61000-4-6 - Power frequency magnetic fields EN 61000-4-8 - Voltage dips, variations, interruptions EN 61000-4-11 Emission EN 61000-6-3 - Conducted and radiated emissions CISPR 22 (EN55022), cl. B - Conducted emissions CISPR 16-2-1 (EN55016-2-1) - Radiated emissions CISPR 16-2-3 (EN55016-2-3) Wire colour Function Red +12V Black 0V GND Yellow D+ Blue DThis keypad is fully programmable. The user operates the keypad by pressing the keys from 0-9, the hash (#) and the bell () symbol. Different codes can be selected for different users, and codes can be added, modified and deleted. The LEDs are used for indication of different signals when the keypad is operated, and the red and green LEDs can also be controlled by the smart-house bus. By configuration change, the behaviour of the LEDs can be set to other combinations. See the user manual for overview. The buzzer signals when a key is pressed and gives also a signal whenever other keypad events occur, e.g. correct code entered, wrong code entered etc. The buzzer can be accessed by smart-house bus as well. BACC-KEYPAD-DC-U connected to the SH2WEB24 Coding/Addressing If the keypad is connected to the SH2WEB24 controller, no addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the SH Tool when creating the system configuration. The red and green LEDs are also configurable via the SH Tool: the user can associate it to any function as a feedback led. Used channels: 2 input channels, 3 output channels. Configuration is carried out by keying in new values on the keyboard, either directly, or after having first removed power to the unit (selectable). BACC-KEYPAD-DC-U connected to the BH8-CTRLX- 230 Coding/Addressing Not possible – pre-coded to 5 fixed addresses

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Also compatible with ..: BH8-CTRLZ - BH8-CTRLX - G3800xx01x - or Dupline-Generator SH2DUG24
• Address assignment Auto through "SIN" (Specific Identification Number) or via BGP-COD-BAT
• Adressedeling. If it used with the BH8-CTRLX-230, the channels have to be programmed by the BGP-COD-BAT
• Protection IP67
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature -15° til 60°C
• Storage temperature -30° til 80°C
• Humidity (non-condensing) 100%
• DIM.: 130 x 50 x 8 mm (Uden Ramme)
• Color White / Black
• Power supply Strømforsyning 9-17 V DC

• BACC-KEYPAD-DC-U_nor.pdf
  
  
• BACC-KEYPAD-DC-U.jpg
  
  
• BACC-KEYPAD-DC-U_deu.pdf
  
  
• BACC-KEYPAD-DC-U_spa.pdf
  
  
• BACC-KEYPAD-DC-U_fra.pdf
  
  
• BACC-KEYPAD-DC-U_ita.pdf
  
  
• BACC-KEYPAD-DC-U_dan.pdf
  
  
• BACC-KEYPAD-DC-U_swe.pdf
  
  
• BACC-KEYPAD-DC-U_eng.pdf