Input Module NPN

• Input module for building automation applications
• 4-contact or NPN transistor inputs
• LED indications for supply and Dupline® bus
• Red LED: programmable function status
• 3-wire system with Dupline® and supply of module through external power supply
• Open PCB with terminal connection

Product Description

The BDD-INCON4 is an input module to be connected to voltage free outputs or NPN transistor outputs. It allows a flexible installation and connection concept to third party devices (e.g. alarm arming devices) in building automation installations. It is part of the smarthouse concept and it can be used with all the functions supported by the smarthouse controller.

Mode of Operation

The BDD-INCON4 is fully programmable via the SH Tool: each input can be individually associated to one or more functions supported by the smart-house system. BDD-INCON4 connected to the SH2WEB24 Coding/Addressing If the input module is connected to the SH2WEB24 controller, no addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the configuration tool when creating the system configuration. The red LED is also configurable via the SH Tool: the user can associate it to any function as a feedback led. Used channel: 4 input channels, 1 output channel BDD-INCON4-U connected to the BH8-CTRLX-230 Coding/Addressing If the input module is connected to the BH8-CTRLX- 230 controller, the user has to program the Dupline® channels using the BGPCOD- BAT: this module has 4 input and 1 output (red LED) channels. LED indication The three LEDs are illuminated only if the input module is supplied with an external power supply. Green LED: power status ON: power supply ON OFF: power supply OFF Yellow LED: Dupline® status ON: Dupline® bus connected OFF: Dupline® bus not connected or faulty Red LED: feedback led Programmable by the user.

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Also compatible with ..: BH8-CTRLZ - BH8-CTRLX - G3800xx01x - or Dupline-Generator SH2DUG24
• Address assignment Auto through "SIN" (Specific Identification Number) or via BGP-COD-BAT
• Adressedeling. If it used with the BH8-CTRLX-230, the channels have to be programmed by the BGP-COD-BAT
• Weight 50 g
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• DIM.: 107 x 50 x 110 mm
• Power supply Supplied by Dupline®bussen

• BDD-INCON4-U_dan.pdf
  
  
• BDD-INCON4-U.JPG
  
  
• BDD-INCON4-U_nor.pdf
  
  
• BDD-INCON4-U_deu.pdf
  
  
• BDD-INCON4-U_ita.pdf
  
  
• BDD-INCON4-U_fra.pdf
  
  
• BDD-INCON4-U_eng.pdf
  
  
• BDD-INCON4-U_spa.pdf
  
  
• BDD-INCON4-U_swe.pdf