Rumtemperatur regulator med display

B4X-TEMDIS

smart house temperature controller with display
Designed to fit into the socket from the Fugue, NICO one Bticino
Displays current room temperature
Turns on / off heating and cooling
Set the desired room temperature
The use of floor sensor is optional

Aurora Temperature Controller

Comes with pre-programmed address of I / O 2
Comes with both white and charcoal gray push button covers
Non-activated inputs and background lighting set with orange light
Orange LED can be disabled by an internal dip switch
Activated inputs are indicated by blue light

Aurora Temp. display, 0 to 50ºC with / pop. adjustment. white and charcoal gray

Note: a description of the heating / cooling output is required,
refer to the manual for smart-house controllers
BH8-CTRLX-230, BH8-CtrlZ and BH8-CTRLG. See section 2.3.5
Please note that the unit can be programmed for both cooling and heating,
but the mode must be selected on the display. Before
For example, cooling management is chosen during the summer and warm
Control over the winter.
The temperature controller works with both floor sensor and Room sensor.
It is possible to enter the smart house controller software to change
/ Program who feel used (or both), along with the temperature
controller.

• For Controller BH8-CTRLX
• Also compatible with ..: Can be used on a UWP 3.0 og Sx2WEB24 Check with a SH2DUG24 Dupline-Generator
• Address assignment BGP-COD-BAT
• Weight 50 g
• Protection IP20
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions 44 mm x 44 mm
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• DIM.: 44 x 44 x 25.2 mm
• Fits FUGA material
• Power supply Supplied by Dupline®bussen
• Other compatible components Niko, Fuga, BTicino: "Luna", "Living", "Ligh"

• B4X-TEMDIS_Eng
  
  
• B4X-TEMDIS_Nor
  
  
• B4X-TEMDIS_Spa
  
  
• B4X-TEMDIS_Swe