Search on blog

Smart House UWP

Home

Home

Home

Home

AURORA PIR sensor - wall mounting (canned)

1

AURORA PIR sensor - wall mounting (canned)

By buying this product you can collect up to 6 loyalty points. Your cart will total 6 points that can be converted into a voucher of 3,00 kr.


B4X-PIR90

Aurora PIR sensor

Passive infrared sensor (PIR)

Designed to fit into sockets and frames from Fuga, NIKO and Bticino

More details

B4X-PIR90

623,75 kr

  •  

    B4X-PIR90

    Passive infrared sensor (PIR)

    Designed to fit into sockets and frames from Fugue, NIKO and Bticino

    Nominal sensing range: max. 6 m

    Activated inputs indicated by blue LED Not enabled entrances indicated by orange led the orange led can be disabled via an internal dipswitch

    Comes with both white and dark gray push button covers

     

    Aurora PIR sensor

    B4X-PIR90 is a PIR detector, which operates by using either the double-elements- detector. It is designed to be mounted in a 44x44 outlet from Fugue, NIKO and Bticino. PIR sensor is equipped with LEDs in two colors which specifies non-activated channel (orange LED) and activated channel (blue LED). The orange LED can be disabled via an internal dipswitch on PIR sensor. PIR sensor is part of the smart-house concept for applications in building automation and can be used to control lights, blinds, air-conditioning and all the other features that are supported by smart-house controller.

    The transmitter is activated if the temperature suddenly changes relative to background radiation (mostly due. Heat radiation from a person). If a person moves within the detection zone, the B4XPIR90 enabled. PIR sensor is designed to be mounted in standard height for a contact. Slow movements between the zones, which results in a detection of less than 0.5 pulses / sec., Not detected. Nor will rapid movements resulting in a detection speed of more than 5 pulses / sec. Since B4X-PIR90 is a passive device, you can place multiple sensors in the same room without interfering with each other.

     

     

     

    • For Controller BH8-CTRLX
    • Also compatible with ..: Can be used on a Sx2WEB24 Check with a SH2DUG24 Dupline-Generator
    • Address assignment BGP-COD-BAT
    • Weight 50 g
    • Protection IP20
    • Beskyttelsesgrad 3 (IEC 60664)
    • Operating temperature -20° til +50°C
    • Storage temperature -50° til +85°C
    • Humidity (non-condensing) 20 til 80% RH
    • House Dimensions 44 mm x 44 mm
    • DIM.: 44 x 44 x 25.2 mm
    • Color white
    • Fits FUGA material
    • Power supply Supplied by Dupline®bussen
    • Other compatible components Niko, Fuga, BTicino: "Luna", "Living", "Ligh"

    Reviews

    Write a review

    AURORA PIR sensor - wall mounting (canned)

    AURORA PIR sensor - wall mounting (canned)

    B4X-PIR90

    Aurora PIR sensor

    Passive infrared sensor (PIR)

    Designed to fit into sockets and frames from Fuga, NIKO and Bticino

    Write a review

    3 other products in the same category: