12P Patch Panel STP C6

12P Patch Panel STP C6 / 10"

A "Patch Panel" is used to terminate network cables in a "Rack Cabinet" or "Rack Frame".

Network cables fitted with the "LSA Tang" - a special rod to both apply and cut the wire at the same time.

This "Patch Panel" handles up to 12 network cables, and it is advisable to use double wall outlets, resulting in this "Patch Panel" handles up to 6 wall outlet.

The optimal solution is to place min. 2 wall outlet in every room, and preferably more. Also remember to place the wall socket at any electrical appliance, such as refrigerator, washing machine etc. These devices will soon download software updates and obtain service via the Internet.

Tip: Install the "Patch Panel" at the top of the "Rack Cabinet". Put a label with an "A" on the first "Patch Panel" and a "B" on the next "Patch Panel", etc.. Stinging in wall outlets now provided with labels with A1-12, B1-12, etc.

NOTE: The twist on each wire couples must be carried forward to LSA skæreklemmen without twisting changed. Each wire pair shall be as short as possible, outside the cable outer jacket. The installation finishes with a test that meets the used standard (min. 6).

Input/Output: 12 x LSA
Output/Input: 12 x RJ45 STP
Standards: C6 EIA/TIA 568 (T568A and T568B)
Panel: Metal (SPCC)
Panel Cover: Aluminium
Jack: 8P8C 50 micro inches gold plated
PCB: FR-4 / UL-94V0
IDC Body: Fireproof ABS UL-94V0
IDC Pin: Bronze and Tinned
IDC Description: For 22-26 AWG 110 / LSA (punch-down)
Insulation Resistance: 500M ohms (min.)
Contact Resistance: 20m ohms (max.)
Current Rating: 1,5 Amps.
DC Resistance: 0,1 ohms (max.)
Withstanding Voltage: 1000 VAC RMS @ 60Hz / 1 min.
IDC Punch Down Cycle: min. 250 Cycles
Jack Insertion Cycle: min. 2000 Cycles
Operation Temperature: -40C ~ +70C
Weight: 670g.
Colour: Black
Dimensions: 255mm(W) x 44mm(H) x 115mm(D)

• Weight 670g
• Operating temperature -40C ~ +70C
• DIM.: 255mm(W) x 44mm(H) x 115mm(D)
• Information Standards: C6 EIA/TIA 568 (T568A and T568B)

• DATA Patch Panel STP C6