New features

• New Vehicle Heating function
• The subnet of the Dupline modules can now be changed
• New support for Robustel M1000 USB USB modem (Huawei E909s-120)
• Now it is possible to set a timeout for the Modbus slave devices
• Improved wireless modules LQI management. Full routing chain is now supported
• Added support of fw rev. 2.0.6 for SH2WBU230N wireless base unit
• Added support of wireless module fw audit:

- SBP2WREP230 (rev2)

- SHJWRE10AExxx (rev4)

- SHJWD200WExxxx (rev5)

- SHJWINS04 (rev2)

- SBP2WDI48524 (REV2)

• [Sofia protocol] When the value is not available, no updates have to be late
• Updated languages (ENG/ITA/NOR/GER/FRA/ESP/SVE/DOWN)
• Updated SxQP360Lxxx city industry
• Updated SBP2MCG324 datasheet

Bug fixing

• Error on the starting day in a calendar function
• BACnet command doesn't work properly with smart light function
• [Sx Tool] sets date & time connecting to a controller
• Not possible to enter the ITS address if a module is manually added to the project
• Copy&Paste of a function into another location adds the copied function under the location Root
• If you change location to a function, the name of the location is correctly changed but the function stays in the previous location
• The Status of the delay ON and delay OFF timer is not correct in the web-app
• [Sx Tool] [Car Park] Car park project view uses misleading names for addresses
• [Car Park] "M2M Address" (CPY <---> UWP) is erroneously changed when the TOOL is connected to two controllers
• [Car Park] "M2M Address" (CPY <---> UWP) shall be disabled in case of integrated CPY
• The start date in the scheduled reports goes to 1 year in the past after upgrading two 7.6.3
• Controller crash when for Example the Playback is present in the configuration
• [CPY] Trying to open the report settings, the window is malformed
• Management error on automation disable hours of Playback function
• It is not possible to edit calendar activity in the web server
• [WEB APP] web Server configuration database permissions aren't correct
• First update error on timer functions
• WM14 Basic driver - wrong PF readings
• [Sx Tool] Prevent empty configuration file creation
• Wrong management of calendar activity with old configuration file
• Playback Function issuing multiple subscriptions
• Wrong behaviour on adding a temdis module with no channel available
• [iOS APP] Password management doesn't work using iCloud Keychain on iOS devices
• [CAR Park] crash of the Tool changing controller in a multiconfiguration
• [SxTool] Error when I try to import a custom driver and the SxTool is in French
• Wrong modbus multiplier in Counter function
• Not possible to create graphs/reports containing the Counter functions value
• Crash of the Tool modifying the event of the local calendar of the Smart Light function
• Bugfix on the restore factory default procedure
• Bugfix on functions diagnostic Modbus flags
• Added check of httpd activity
• Relay modules show an invalid status after writing the configuration file
• Wrong labels of Intruder alarm functions in live signals
• [Modbus] Wrong swap the order of the variables of 3 and 4 word in the GERMAN fashion
• Smart light function: Luxmeter calibration parameters lost after the configuration upload
• Smart light function: The parameters written in live signals are lost when reading the configuration

New features

• New SxQP360Lxxxxx PIR modules
• New Switch function
• New Program function
• Upgraded timer functions (see manual)
• The Modbus driver revision management
• Communication port 10001 is no longer needed
• USB modem MULTITECH MTD-H5 supported
• Reduced SxTool configuration file loading time
• New feedback progress bar on SB2DALI230 module configuration window
• New calibration procedure for Car Park installation (SBP2WEB only)
• [CPY] Deletion of historical data (SBP2CPY only)

Bug fixing

• Error on starting the day in a calendar function
• Error on stop signal of delay timer function
• Astronomical clock data not present in the report
• Ball field for scheduled reports doesn't show the full list
• Scenarios S2/S3/S4 of E.g. the Dupline Dimmer function are not playbacked by E.g. Simulated habitation
• In the Page calendar editing, the day of the week is misleading in connection to the day number
• Interval timer: the timer function works properly only the first time after writing the configuration
• Function name missing in one step of the Dupline temperature function
• The Start&Stop signals of Recylcing and Interval hours don't work correctly
• Playback function sometimes starts even if it should not
• The Dupline compatibility - the Critical issue regarding the MIST addressing
• Web server permissions erased when the configuration is read from the controller
• Module doesn't work at controller startup even if is already configured
• The Calendar function can't set end time smaller than start time in case of different dates
• Constant light: the movement signal doesn't reload the energy save timer
• Label not required in SHJWINS04XXX modules in counting people configuration
• Missing PID filter inside the functions window
• SxTool cuts the signal names in the functions window
• SMS receive options not shown correctly
• Web server accounts rows not shown properly the first time
• Counter graph is not displayed in the page
• Switch function: not possible to control a Switch function using a Sequence function
• Slave zones don't follow the master zone during calibration of the luxmeter
• For example Smart light: energy save hours, when expires, does not activate Sequence A
• Spike values on graph about analogical variables
• Slow system response time related to dimmer and Rollerblind functions
• Tool crash after select "information" of a module
• SOFIA updates not sent
• Controller stops sending the FTP scheduled reports after configuration download
• SxTool error after importing updated driver
• SmartLight doesn't update the lux value from weather station to configuration download
• [CPY] Moving windows put them in the middle of nowhere
• [CPY], the Selected window is not moved in the foreground
• [CPY] Wrong Pop-Up inside the clock configuration
• [CPY] In the entire park status calculation, virtual groups have to be excluded virtual groups
• [CPY] If you edit an existing virtual group, some bays are not belonging to the group, aren't shown in the related real group
• [CPY] Wrong procedure in updating database
• [CPY] Change category command doesn't work in the integrated version
• The Dupline compatibility: solved issues when assigning the channels for the Temdis display
• Wireless programming fails
• SMS: test sms fails even if the data connection is working
• The Crosstalk icon always hidden on CP8 sensor calibration window
• Disable LED option not present in standard mode
• Copy&paste of functions to different locations is not possible
• Tool does not export correctly the modbus map .csv file for the Fx Switch
• Bugfix on Tool Signals window "Group by module" filter option (missing function icons
• Bugfix of Tool crash using location filtering after stop gambling functions
• Bugfix on Tool location filtering
• Carpark functions can be added into Lane/Line locations from the "Functions" window
• Function restore doesn't start the energy save hours of a dimmable light
• Local calendar activities issues
• Copy & paste: Heating/cooling system function setting lost when I use copy & paste
• Not possible to delete the COM1 port from the project
• System crash related to wireless diagnostic management
• Huawei modem E3531i-2 is not working with the Sx2WEB system (no data connection)
• System crash if live signals are active and the ads lose connection with tool
• SxTool crash when copy/paste a location with the Dupline-modules
• Delete objects-locations does not work
• [CPY] Drawings: the virtual displays are not saved
• Value range mismatch between BACnet object and parameter
• Tool crash when I add manually a master generator module with right click on the locations window