Smart-house Controller W/Windows CE

Obsolete quite pr. May 1, 2018.

The BH8-CTRLX, popularly referred to as Generation 1 and 2, has for many years been the backbone of the Smartbuilding system until 4 years ago was replaced by our latest and the current check: SH2/SB2.

Upgrade to the UWP Platform SH2WEB24 See more Here

The BH8-CTRLX-230 Controller

• Programmable smart-house controller.
• The option for external GSM modem for monitoring and control via sms
• User-friendly configuration via Windows XP/Vista
• Ethernet, USB-port and SD-card for configuration and reading/writing
• of the smart-house data
• smart house with many options: lighting function, roller blinds, alarm etc.
• RS232 connection to external equipment connection/gateways
• H8-house for DIN rail mounting (EN50022)
• AC - or DC-supply (battery backup)

Intelligent features

smart-house controller is a programmable integrated device,

there are specifically designed for applications in building automation.

The controller has dedicated features for the lighting control, temperature control,

pulldown management and alarm monitoring. In addition, it has smart functions such as sequence control that makes it possible to include a number of functions can be performed automatically, and simulated living quarters, on the basis of the residents ' authentic behaviour control lights and roller blinds while the owner is not home.

Configuration of the smart-house controller

smart-house controller is as default configured without intelligent

the input and output functions for the operation of the modules on the smart-house bus. To make the setup of the intelligent features, the controller is configured by the Windows based smart-house configuration tool. This

the software is free and comes with the controller on a cd-rom. the smart-house configuration tool runs on pcs with Windows ® XP/Vista /windows 7

the smart-house configuration tool ensures full documentation of the smart-house installation. This tool is used to form a logical overview of the building, and in each room it is possible to place the smart-house IOmoduler, which is necessary for the desired features. In order to simplify the operation includes the smart-house configuration tool a database of all

smart-house products. Finally, configure the features in each room using. the installed input/udgangsmoduler. A configuration can be transferred to/from the controller either via Ethernet or using. a standard SD memory card.

Supply led

The green supply led will be lit when there is power on the module.

If the bus is short-circuited, the led will indicate this in two ways:

1. The brightness becomes weaker in ca. 30 sec.

2. The led and the yellow buslysdiode flashes.

Buslysdiode

When the power is connected, the yellow buslysdiode immediately lyse permanently. There will be 8 V DC at the bus to the charging of the modules supplied by the bus. After indkoblingsforsinkelsen is interrupted the led in each pay on winning banker bets, which causes the permanent lights to blink faintly. The more outputs that are activated on the bus, the more flashing led.

The option GSM-udvidelsesmodulBH4-CTRLAG

smart-house controller can be connected to a GSM extension module,

that makes it possible to monitor and control the smart-house signals via sms messages to/from GSM mobile phones. Sms messages can be used in three different ways:

smart-house controller can be programmed to send out event based sms messages.

The event can be a channel which is activated or deactivated, or it can be an analog signal that exceeds a threshold value.

Requests for status of digital or analog data can be sent and answered via sms messages.

Status of digital channels can be controlled by sending commands via sms messages. In order to be able to use GSMmodulet the following are required:

A SIM card with the pin to be inserted into the hole on the front of BH4-CTRLAG. The SIM card must be of the 3 V-type.

There must be a GSM antenna connected to the FME connector on the BH4 - CTRLAG. If the device is surrounded by metal, the antenna must be installed outside of the etalomgivelserne.

The opportunity for bus expansion module BH4-CTRLAB-230

smart-house controller can be connected with up to three bus expansion modules, which each represent a smart-house network, with the possibility of 4 x 128 inputs and 4 x 128 outputs.

The controller is named BUS 0 and BUS expansion modules BUS 1, 2 and 3. BUS-names are used during configuration of the smart house controller.

Intelligent features

smart-house controller is a programmable integrated device that is specifically designed for applications in building automation. The controller have dedicated functions tillysstyring, temperature control, pulldown management and alarm monitoring. In addition, it has smart functions such as sequence control that makes it possible to include a number of functions can be performed automatically, and simulated living quarters, on the basis of the residents ' authentic behaviour control lights and roller blinds while the owner is not home.

Configuration of the smart-house controller

smart-house controller is as default configured without intelligent input - and-output functions for the operation of the modules on the smart-house bus. To make the setup of the intelligent features, the controller is configured by the Windows based smart-house configuration tool. This software is free and comes with the controller on a cd-rom. the smart-house configuration tool runs on pcs with Windows ® XP/Vista.

AC drive Overspændingskat. III

(IEC 60664) ominel power supply

via the terminal 21 and 22 85-264 V AC (IEC 60038)

Frequency 47-63 Hz

Consumption Typ. 20 VA

at max. load

The power dissipation ? 12 W

Rated impulsholdespænding

230 V 4 kV

115 V 2,5 kV

• Weight 400g
• Protection IP20
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature 0° til +50°C
• Storage temperature -20 - +85 °C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions H8HUS
• Mounting DIN-skinne

• bh8-ctrlx-230 ds_nl.pdf
  
  
• bh8-ctrlx-230 ds_dan.pdf
  
  
• bh8-ctrlx-230 ds_eng.pdf
  
  
• bh8-ctrlx-230 ds_fra.pdf
  
  
• bh8-ctrlx-230 ds_ger.pdf
  
  
• bh8-ctrlx-230 ds_spa.pdf
  
  
• bh8-ctrlx-230 ds_sv.pdf
  
  
• bh8-ctrlx-230_spa.pdf
  
  
• bh8-ctrlx-230 ds_no.pdf