Control for DC Rollerblind Motor

Product Description

This is a 2-DIN relay output module to independently control two DC rollerblind motors. It has been developed to be
connected to and controlled by the smart-house system controllers. The rollerblind motor is driven by two relays in series:
one to switch the motor ON/OFF and the second one to control the direction UP/DOWN. These two relays are controlled in such a way to respect the motor timing before any reversing of the motor direction.

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) UWP 3.0 og Sx2WEB24
• Height 90 mm
• Width 35 mm
• Depth 44 mm + 14,5 mm
• Weight 150 g
• Forside IP50
• Screw terminal IP 20
• Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions 2-DIN-modul
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• Mounting DIN-skinne
• Power supply 15 til 24 VDC ± 20%
• Rated operational power 3W

• SH2RODC224-rev4_fra.pdf
  
  
• SH2RODC224-rev4_swe.pdf
  
  
• SH2RODC224_fra.pdf
  
  
• SH2RODC224-rev4_deu.pdf
  
  
• SH2RODC224_ita.pdf
  
  
• SH2RODC224_deu.pdf
  
  
• SH2RODC224_nor.pdf
  
  
• SH2RODC224-rev4_dan.pdf
  
  
• SH2RODC224-rev4_eng.pdf
  
  
• SH2RODC224_spa.pdf
  
  
• SH2RODC224-rev4_ita.pdf
  
  
• SH2RODC224_dan.pdf
  
  
• SH2RODC224_swe.pdf
  
  
• SH2RODC224-rev4_nor.pdf
  
  
• SH2RODC224_eng.pdf
  
  
• SH2RODC224-rev4_spa.pdf