Smart House LED-Dimmer

SH2D500W230

This 500W universal dimmer is designed for DIN rail mounting
and is 2 YOUR broad. The dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps (see table "LED-lamps").
The maximum connected load is 500 W, and the load is dependent on the temperature: the reduction is described under development in "Load reduction curve".
The dimmer automatically detects the connected load is resistive, capacitive or inductive. If it is an LED lamp to be used, the user must, however, even choosing the right curve as described below.
The damper is equipped with memory for last selected scenario.
The technology used makes it possible to protect the dimmer
electrical short circuit, overload and over-temperature. thanks
be the internal bus, one can easily connect multiple dimmers next to each other without using cables to Dupline bus (see "compounds sesdiagram").
In addition, the integration of the cooling body ability to mount more coherent dimmer switches without that the load be reduced
Due to increasing temperature.

• For Controller BH8-CTRLX - BH8-CTRLZ - G3800xx01x
• Also compatible with ..: Can be used on a UWP 3.0 og Sx2WEB24 Check with a SH2DUG24 Dupline-Generator
• Address assignment BGP-COD-BAT
• Weight 150 g
• Protection IP50
• Screw terminal IP 20
• Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
• Operating temperature -20° to +50°C (-4° to 122°F)
• Storage temperature -50° to +85°C (-58° to 185°F)
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions 2-DIN-modul
• Mounting DIN-skinne
• DIM.: Dimensioner 2 DIN-modul
• Power supply Nominel forsyningsspænding 115/240 V AC

• Data- Dan
  
  
• Data- Eng
  
  
• Data- Fra
  
  
• Data- NL
  
  
• Data-Nor
  
  
• Data-Spa
  
  
• Data-Swe