• Passive infrared presence/movement detector • Developed to fit into wall socket and frames from Elko, Gira and Jung • Indoor applications • Operating distance: max 10 m • Supplied by bus, no external power required • Programmable white and blue LED for presence and movement detection • Delivered with 2 white and 1 black push-button covers
By buying this product you can collect up to 7
loyalty points.
Your cart will total 7
points that can be converted into a voucher of
3,50 kr.
• Passive infrared presence/movement detector • Developed to fit into wall socket and frames from Elko, Gira and Jung • Indoor applications • Operating distance: max 10 m • Supplied by bus, no external power required • Programmable white and blue LED for presence and movement detection • Delivered with 2 white and 1 black push-button covers
• Passive infrared presence/movement detector • Developed to fit into wall socket and frames from Elko, Gira and Jung • Indoor applications • Operating distance: max 10 m • Supplied by bus, no external power required • Programmable white and blue LED for presence and movement detection • Delivered with 2 white and 1 black push-button covers
Product Description
The B5X-PIR90-U is a 90° PIR sensor to detect presence and/or movement in indoor installations. It is part of the smart-house concept and can be used to control lights, rollerblinds, air-conditioning, intruder alarms and all the other functions supported by the smart-house system, in an automatic way depending on people-presence. This sensor is completely programmable via the SH tool.
Mode of Operation
This PIR sensor responds to any fluctuation in infrared heat radiation, so any object or human presence changes the thermal image detected by the sensor when entering its field of vision. The sensor is equipped with a segmented lens that divides the field of vision into active and passive zones (zones not visible to the sensor, see figures “Horizontal and Vertical sensitive area”). When a heat source crosses these zones, the sensor detects the change in infrared radiation and presence and/or movement are recognised. How sensitive and fast the sensor has to be to detect presence and/or movement can be programmed by means of four parameters, by means of the SH tool if the sensor is controlled by a master unit SH2WEB24 or by using the programmer BGP-COD-BAT if the sensor is connected to a BH8-CTRLX- 230. The four parameters are: mode of detecting the crossing of active zones, sensitivity, the number of pulses and the time window in which these pulses have to be detected. These four parameters have to be set for both presence and movement recognition. Movement is used by the system in the intruder alarm function and to switch the light on, while presence is used in the light function to reload the energy-save timer (i.e. each time presence is detected, the energy-save timer starts counting from the beginning). 1) Mode of detection A: one border between the active and the passive zone has to be crossed to give a pulse signal. This option has to be selected for presence detection and movement and turns the light on as soon as a person moves from an active to a passive area or vice versa (very quick response). B: two borders have to be crossed to give a pulse signal. The person has to move from an active area to another active area, passing through a passive one or vice versa. This option is recommended for sensors used in the intruder alarm function, in order to avoid false alarms. 2) Sensitivity A number can be set from 3 to 100: the smaller this value is, the longer the detection distance, but the higher the sensitivity to heating sources. In the figures “Horizontal and Vertical sensitive area”, three examples of different sensitivity can be seen. 3) Number of pulses The number of pulses is calculated according to mode A or B before sending a people detection message to the controller. This can be set from 1 to 8. 4) Time window This is the time interval within which the predefined number of pulses is detected. It can be set from 1 to 10 seconds. In the table below is an example of settings which, of course, might depend on environmental conditions, application and type of installation.
B5X-PIR90-U connected to the SH2WEB24 If the PIR sensor is connected to the SH2WEB24, the number of pulses for presence and movement detection, the interval period, the sensitivity as well as the LED functions are programmed with a very user friendly interface in the tool (see SH tool manual). The detection speed (number of pulses in a time interval) and the sensitivity have to be defined as described above. LED programming There are two configurable LEDs (one white and one blue) on board the B5XPIR90- U to be programmed. White LED: the user can select one of the following options 1.LED always OFF 2.LED programmed as guide light: it is always ON 3.LED ON when a presence is detected 4.LED ON when a movement is detected If the white LED is not programmed, it is always OFF. Blue LED: the user can select one of the following options: 1.LED always OFF 2.LED ON when a presence is detected 3.LED ON when a movement is detected If the blue LED is not programmed, it is always OFF. Coding/Addressing If the input module is connected to the SH2WEB24 controller, no addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the SH tool when creating the system configuration. Used channels: 2 input channels, 1 output channel. B5X-PIR90-U connected to the BH8-CTRLX-230 - Coding/Addressing If the input module is connected to the BH8-CTRLX- 230 controller, the user has to program the Dupline® channels using the BGPCOD- BAT. In this case, the sensor will detect movement but not presence. The module has the following channels: I/O 1: PIR input I/O 2: Not used I/O 3: Not used I/O 4: Sensitivity If no channels are programmed, the default value is 3 metres. I/O 5: Blue Led output I/O 6: White Led output I/O 7: Movement pulses detection If no channels are programmed, the default value is 3 pulse.
Mounting
The PIR detector is designed for mounting at a standard switch height (1,1m.). As the B5X-PIR90-U is a passive device, several detectors can be placed in the same room without interfering with each other. The module should not be installed as follows: a) Outdoors. b) In places exposed either to sunlight or to motor vehicle headlights pointing directly at the sensor. c) In places exposed to direct air flow from a heater or air conditioner. d) In places where rapid temperature changes occur. e) In places exposed to severe vibration. f) Close to glass or other objects which might reflect the infrared radiation. Note: If the sensor is to detect presence, please be careful to mount it so that the area where presence has to be detected is completely covered by the sensitive area of the sensor. See figures “Horizontal and Vertical sensitive area”
For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
Also compatible with ..: BH8-CTRLZ - BH8-CTRLX - G3800xx01x - or Dupline-Generator SH2DUG24
Address assignment Auto through "SIN" (Specific Identification Number) or via BGP-COD-BAT
Adressedeling. If it used with the BH8-CTRLX-230, the channels have to be programmed by the BGP-COD-BAT
Weight 150 g
Protection IP20
Forside IP50
Screw terminal IP 20
Beskyttelsesgrad 3 (IEC 60664)
Operating temperature 0° til +50°C
Storage temperature -20° til +70°C
Humidity (non-condensing) 20 til 80% RH
House Dimensions 55 mm x 55 mm
Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
DIM.: 55 mm x 55 mm x 24 mm
Color White / Black Supplied with black and white trykknapcovere