Description
Canister for installation in the hulrumsvægge and lofterDåserne can be fitted with the following frame types: Technical mounting frame, as well as the design of the framework: CHOICE, PURE, SOFT.The cans through the discharge klostykker be installed in wall thicknesses from 9 to 40 mm.Used 57 mm hole saw. Mærkelære for FUGUE AIR forfradåse be used.The cans are windproof IP40.The cans supports the following frame range. See FUGUE kombinationsskema.The mounting of the inserts in the cans may be made on one or more of the following ways: via klostykker, via screws in the front for Technical mounting bracket and through the skruetårne in the bottom. The cans are IP40.Is at the bottom equipped with 3 pcs. 16 mm and 1 pc. 20 mm forms for cable and pipes. Cable relief supplied. There is a possibility of review from canned to canned.To meet the requirements of 850 degree glødetrådsprøve.Certified according to en 1364-1:199.
Additional information
Guide
Borerlære
Kombinationskema FUGA cans and frames