Solid State Relay output module

Product Description

This is a four-solid-staterelay output module for DIN mounting. The outputs are normally OFF. When an activation
command is received from the Dupline® bus, the output turns ON and remains ON until the OFF command is
received. Thanks to the internal bus, the SH2SSTRI424 modules can be connected one next to the other without the need
for wiring the Dupline® bus.

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) UWP 3.0 og Sx2WEB24
• Height 90 mm
• Width 35 mm
• Depth 44 mm + 14,5 mm
• Weight 150 g
• Failsafe mode Hvis SH2MCG24 mister kommunikationen med SH2WEB24, slukker Dupline®- udgangen. I den situation vil alle moduler der er tilsluttet bussen gå i den fejlsikre tilstand der er programmeret individuelt med SH-værktøjet.
• Protection IP20
• Forside IP50
• Screw terminal IP 20
• Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions 2-DIN-modul
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• Mounting DIN-skinne
• Power supply 15 til 24 VDC ± 20%
• Rated operational power 400 mW

• SH2SSTRI424_nor.pdf
  
  
• SH2SSTRI424_swe.pdf
  
  
• SH2SSTRI424_dan.pdf
  
  
• SH2SSTRI424.jpg
  
  
• SH2SSTRI424_deu.pdf
  
  
• SH2SSTRI424_spa.pdf
  
  
• SH2SSTRI424_sve.pdf
  
  
• SH2SSTRI424_eng.pdf
  
  
• SH2SSTRI424_fra.pdf
  
  
• SH2SSTRI424_ita.pdf