Search on blog

Smart House UWP

Home

Home

Home

Home

Temperature Sensor

1

Temperature Sensor

By buying this product you can collect up to 13 loyalty points. Your cart will total 13 points that can be converted into a voucher of 6,50 kr.


• Temperature sensor
• Temperature range: -40°C to +60°C
• Plug and cable versions
• Easily mountable
• No power supply is needed

More details

1 210,00 kr

  • • Temperature sensor
    • Temperature range: -40°C to +60°C
    • Plug and cable versions
    • Easily mountable
    • No power supply is needed

    Product Description

    The BSI-TEMANA-U is a temperature sensor for indoor and outdoor applications. It is part of the smarthouse concept and it can be used in the functions supported by the smart-house controller where a temperature value is needed. The environmental data read from the smart-house sensor (temperature and humidity) are logged into the SH2WEB24.

    Type Selection


    Connection Supply by Dupline®
    M12 plug BSI-TEMANA-U
    2 m cable BSI-TEMANAB-U

    Mode of Operation

    The sensor is mounted right at the location where the temperature is to be measured. The sensor measures the temperature and transmits the value to the smarthouse controller. To measure the air temperature, the sensor should not be wallmounted, but should be exposed to air flow. BSI-TEMANAx-U connected to the Sx2WEB24 Coding/Addressing If the temperature sensor is connected to the Sx2WEB24 controller, no addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the Sx tool when creating the system configuration. BSI-TEMANAx-U connected to the BH8-CTRLX-230 Coding/Addressing If the sensor is connected to the BH8-CTRLX-230 controller, the user has to program the dupline channels using the BGP-COD-BAT: this module has 1 analink output channel.

    BSI-TEMANA-U

    • For Controller SH2WEB24 - SB2WEB24 - SA2WEB24
    • Also compatible with ..: BH8-CTRLZ - BH8-CTRLX - G3800xx01x - or Dupline-Generator SH2DUG24
    • Address assignment Auto through "SIN" (Specific Identification Number) or via BGP-COD-BAT
    • Adressedeling. If it used with the BH8-CTRLX-230, the channels have to be programmed by the BGP-COD-BAT
    • Weight 338 g
    • Protection IP67
    • Operating temperature -40° til + 60°C
    • Storage temperature -55° til +85°C
    • Humidity (non-condensing) 20 til 80% RH
    • Mounting Direct wall mounting Note: To measure the air temperature, the sensor should not be wall-mounted, but it should be exposed to air flow.
    • DIM.: 68,3 x 35 x 15 mm
    • Information Tilslutning BSI-TEMANA-U M12-stik / BSI-TEMANAB-U Kabel: 3 x 0,34 mm2
    • Power supply Supplied by Dupline®bussen

    Reviews

    Write a review

    Temperature Sensor

    Temperature Sensor

    • Temperature sensor
    • Temperature range: -40°C to +60°C
    • Plug and cable versions
    • Easily mountable
    • No power supply is needed

    Write a review

    5 other products in the same category: