Search on blog

Smart House UWP

Home

Home

Home

Home

Wireless base unit

1

Wireless base unit

By buying this product you can collect up to 10 loyalty points. Your cart will total 10 points that can be converted into a voucher of 5,00 kr.


BH4-WBU-230

Smart-house transceiver for building automation applications

 

 

More details

BH4-WBU-230

1 005,00 kr

  • BH4-WBU-230

    INPUT SPECIFICATIONS smart-house transceiver for building automation applications Easy to install in both new and legacy installations No limit on number of connected switches BH4-WBU-230 DIN rail mounting Range up to 100 m in free air Easy to operate FUNCTIONAL DESCRIPTION The wireless Bxx-WLS4 programmed as standard Fuga / Opus switches (but without channel coding for (I / O 5-8), since the LEDs automatically follows press buttons). Communication between the wireless switch Bxx-WLS4 and base station BH4-WBU-230 is created as follows: The used smart house addresses on the wireless devices are programmed all of the wireless device. The only special interaction in connection with wireless devices is the association process (the Association). This process ensures that wireless devices is not disturbed by other wireless devices. To associate a device to the base:

    1) Press the Mode button on the base. Associate LED lights.

    2) Press a button on the wireless device to be attached. - All LEDs on the device will light for about 1 second.

    3) Press the mode button on the base until both ASSOCIATE- and Disable-LED goes out. This indicates normal operation. If the connection from a wireless device fails, all LEDs will flash briefly when communication is attempted established with base unit three times. If a device associated with base A, and both base A and B are within its range, the following procedure is used if you want to reassociate the device with base B:

    1) Select Disable mode on base A.

    2) Select Associatemode on base B.

    3) Press a button on the wireless device to be attached - All LEDs on the device will light for about 1 second. 4) Press the mode button on both bases until both ASSOCIATE- and Disable-LED goes out. This indicates normal operation. LEDs: Power LED indicates that the unit is powered (230 VAC). Smart-house OK LED indicates that detected a smart house signal. RF LED indicates received wireless communication with the base. Associate-LED indicates connection (Association). Disable LED indicates that the base ignores any wireless communications.

    • For Controller BH8-CTRLX - BH8-CTRLZ - G3800xx01x
    • Also compatible with ..: Can be used on a Sx2WEB24 Check with a SH2DUG24 Dupline-Generator
    • Address assignment BGP-COD-BAT
    • Adressedeling. If used the same with SH2DUG24 - Read the Dupline HW manual for Compatibility mode
    • Weight 250g
    • Protection IP20
    • Beskyttelsesgrad 3 (IEC 60664)
    • Operating temperature -20°C til +50°C (-4° til + 122°F)
    • Storage temperature -50°C til +85°C (-58° til +185°F)
    • Humidity (non-condensing) 20 til 80% RH
    • House Dimensions H4 HUS
    • DIM.: Dimensioner 72 x 77 x70 mm

    Reviews

    Write a review

    Wireless base unit

    Wireless base unit

    BH4-WBU-230

    Smart-house transceiver for building automation applications

     

     

    Write a review

    16 other products in the same category: