Udgangs moduler 8 x triac udgang 230VAC 8x10W

BH4-SSTRI8-230

Starting modules 8 x triac output 230VAC 8x10W

Output modules for heat management

Why let the plumber install an expensive heating control when Smart House integrate heat control in an elegant way.

These modules control actuators mounted on eg. Floor heating distributor. It is clearly an advantage to buy 230V telecommunications States.

Starting modules 8 x triac output 230VAC

* Use thermostatic valves IFB. with heating Shunts.

OUTPUT SPECIFICATIONS

8-channel receiver with triac output

Module load: 8 x 10 W
For mounting on DIN rail (EN50022)
LED indication of supply, smart-house signal and outputs
AC supply voltage
H4-housing
Address coding by BGT-COD-BAT

8-channel receiver with eight normally open solid state outputs.

Each output is coded via code programmer BGT-CODBAT.

Changing the factory setting is described in the data sheet for BGTCOD-BAT.

The outputs are normally disabled.

When a transmitter coded to the selected channel, activates

end. When the selected channel is disabled, disable the output.

The factory setting is made so that if the smart-house

bus signal is lost, disable all exits.

• For Controller BH8-CTRLX - BH8-CTRLZ - G3800xx01x
• Also compatible with ..: Can be used on a UWP 3.0 og Sx2WEB24 Check with a SH2DUG24 Dupline-Generator
• Address assignment BGP-COD-BAT
• Weight 400g
• Protection IP20
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature -5 - +50 °C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• Mounting DIN-skinne
• DIM.: H4 Hus
• Power supply Supplied by Dupline®bussen

• bh4-sstri8-230 ds_dan.pdf
  
  
• bh4-sstri8-230 ds_spa.pdf
  
  
• bh4-sstri8-230 ds_no.pdf
  
  
• bh4-sstri8-230 ds_sv.pdf
  
  
• bh4-sstri8-230 ds_eng.pdf
  
  
• bh4-sstri8-230.jpg