Power dimmer up to 500W

Product Description

This 500W universal dimmer is designed for DIN-rail mounting. This universal dimmer is suitable for dimming
resistive, inductive and capacitive loads and LED lamps (see LED lamps table). The maximum load of
R, L, C type is 500W depending on the temperature:
the reduction is described according to the trend in the diagram “derating curve”.
The dimmer automatically detects if the connected load is resistive, capacitive or inductive, but if a LED lamp is to be driven, the user has to select the right curve as described below. The dimmer is completely
programmable via the smart-house tool. The technology used enables to electrically protect the dimmer against
short circuit, overload and over-temperature. Thanks to the internal bus, it can be easily connected to adjacent
dimmers (see “wiring diagram”) without the need of cabling the Dupline® BUS. Futhermore, the integrated
sink allows you to mount the dimmers adjacently without any reduction of the load due to the increased temperature.

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) UWP 3.0 og Sx2WEB24
• Height 90 mm
• Width 35 mm
• Depth 44 mm + 14,5 mm
• Weight 150 g
• Protection IP50
• Forside IP50
• Screw terminal IP 20
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions 2-DIN-modul
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• Mounting DIN-skinne
• Power supply 115/240 VAC ±10%
• Rated operational power 1 W, 2,5 VA

• SH2D500W1230_eng
  
  
• LED curve selection_eng