• Universal dimmer up to 500W for R, L, C load and LED lamps • Automatic load detection for L, R, C loads • Integrated heat sink for temperature dissipation • 1 dimmable output • Soft start/stop • Protected against short circuit, overload and high temperature • Minimum load 3 W • Instantaneous variables readout: current, voltage, power • Energy measurement: kWh • Faulty lamp recognition
By buying this product you can collect up to 16
loyalty points.
Your cart will total 16
points that can be converted into a voucher of
8,00 kr.
• Universal dimmer up to 500W for R, L, C load and LED lamps • Automatic load detection for L, R, C loads • Integrated heat sink for temperature dissipation • 1 dimmable output • Soft start/stop • Protected against short circuit, overload and high temperature • Minimum load 3 W • Instantaneous variables readout: current, voltage, power • Energy measurement: kWh • Faulty lamp recognition
This 500W universal dimmer is designed for DIN-rail mounting with energy measurement. Single phase variables: VLN, A, W. Energy measurement: total kWh consumed by the connected load. This universal dimmer is suitable for dimming resistive, inductive and capacitive loads and LED lamps (see LED lamps table). The maximum load of R, L, C type is 500W depending on the temperature: the reduction is described according to the trend in the diagram “derating curve”. The dimmer automatically detects if the connected load is resistive, capacitive or inductive, but if a LED lamp is to be driven, the user has to select the right curve as described below. The dimmer is completely programmable via the smart-house tool. The technology used enables to electrically protect the dimmer against short circuit, overload and over-temperature. Thanks to the internal bus, it can be easily connected to adjacent dimmers (see “wiring diagram”) without the need of cabling the Dupline® BUS. Futhermore, the integrated sink allows you to mount the dimmers adjacently without any reduction of the load due to the increased temperature.
For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) UWP 3.0 og Sx2WEB24
Height 90 mm
Width 35 mm
Depth 44 mm + 14,5 mm
Weight 150 g
Protection IP50
Forside IP50
Screw terminal IP 20
Beskyttelsesgrad 3 (IEC 60664)
Operating temperature -20° til +50°C
Storage temperature -50° til +85°C
Humidity (non-condensing) 20 til 80% RH
House Dimensions 2-DIN-modul
Datasheet / Manual Download Data Sheet / Manual - click on the tab Download