• Small sized single relay output • Load: 13A / 250VAC • Withstands 130A inrush current • Bus supplied
The BDA-RE13A-U is a module with a single relay output. It is part of the smart-house concept and can be used with all the functions supported by the smart-house controller. When an activation command is received from the Dupline® bus, the output turns ON and remains ON until an OFF command is received.
Mode of Operation
The BDA-RE13A-U is fully programmable via the SH tool: the output can be individually associated to one of the functions supported by the smart-house system. Due to its construction with bistable relays, the module is intended for lighting control only. It is strongly recommended that it is not used for heating systems, as the status of the output is not predictable should any fault arise. BDA-RE13A-U connected to the SH2WEB24 Coding/Addressing If the output module is connected to the SH2WEB24 controller, no addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the SH tool when creating the system configuration. Used channels: 1 output channel. BDA-RE13A-U connected to the BH8-CTRLX-230 Coding/Addressing If the input module is connected to the BH8-CTRLX- 230 controller, the user has to program the Dupline channels using the BGPCOD- BAT: this module has 1 output channel, preprogrammed on channel A1.
For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
Also compatible with ..: BH8-CTRLZ - BH8-CTRLX - G3800xx01x - or Dupline-Generator SH2DUG24
Address assignment Auto through "SIN" (Specific Identification Number) or via BGP-COD-BAT
Weight 50 g
Beskyttelsesgrad 3 (IEC 60664)
Operating temperature -20° til +50°C
Storage temperature -50° til +85°C
Humidity (non-condensing) 20 til 80% RH
Datasheet / Manual Download Data Sheet / Manual - click on the tab Download