Control for AC Rollerblind Motor

• Up/down control of 1 rollerblind motor
• Up/down interlocking for motor
• AC power supply
• Design for mounting in eurobox
• Relay load 5A

Product Description

The SHDRODC230 is a decentral module to control one AC rollerblind motor. It has been developed to be connected to and controlled by the smart-house system controllers. The rollerblind motor is driven by two relays in series: one to switch the motor ON/OFF and the second one to control the direction UP/DOWN. These two relays are controlled in such a way as to respect the motor timing before any reversing of the motor direction.

Mode of Operation

This rollerblind module is driven by the smart-house controller to move rollerblinds, sunblinds and shutters. It receives the UP and DOWN command from the smart-house, and then activates the relevant output accordingly. The two outputs are driven independently and can be managed by different rollerblind functions. The UP/DOWN output remains active for a time known as “running time” or until another UP/DOWN command is received. Before reversing the movement, the output will remain deactivated for a time called “reverse delay”. The reverse delay time is sent to the SHDRODC230 by the smarthouse. The running time is managed by the controller. If the tilting function is enabled, the SHDRODC230 will be enabled to manage the tilting command received from the smart-house. The tilting command can be of two types: tilting UP and tilting DOWN. Once this command is received, the SHDRODC- 230 will activate the UP or DOWN output for the tilting time always respecting the reverse delay time. Addressing No addressing is needed since the module is provided with a specific identification number (SIN): the user has only to insert the SIN number in the configuration tool when creating the system configuration. Used channel: 1 output channel.

• For Controller UWP 3.0 - SH2WEB24 - SB2WEB24 - SA2WEB24
• Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) UWP 3.0 og Sx2WEB24
• Weight 50 g
• Beskyttelsesgrad 3 (IEC 60664)
• Operating temperature -20° til +50°C
• Storage temperature -50° til +85°C
• Humidity (non-condensing) 20 til 80% RH
• House Dimensions Dimensioner (h x w x d) 50 x 50 x 30
• Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
• Fits EURO Material and cans
• Power supply 230 VAC ± 15% (IEC 60038
• Rated operational power ≤ 2 W

• SHDRODC230-rev4_spa.pdf
  
  
• SHDRODC230-rev4_fra.pdf
  
  
• SHDRODC230-rev4_deu.pdf
  
  
• SHDRODC230-rev4_eng.pdf
  
  
• SHDRODC230-rev4_nor.pdf
  
  
• SHDRODC230-rev4_swe.pdf
  
  
• SHDRODC230-rev4_dan.pdf
  
  
• SHDRODC230-rev4.JPG