Search on blog

Smart House UWP

Home

Home

Home

Home

Installation Example of a Standard house of 150 – 180m2

Standart house at 150 – 180m2 Aurora series

By buying this product you can collect up to 425 loyalty points. Your cart will total 425 points that can be converted into a voucher of 212,50 kr.


Smart-house components:

1. Web/Controller module
2 pcs. Master kanalgenerator
8 pcs. Relæoutput modules 4 x 16A
4. Dimmer 1 x 500W
6 pcs. PIR sensor inside of the assembly
1. LUX meter sel. mounting the PIR Sensor and Luxmeter
17stk. Press Aurora
3 pcs. Smoke alarms
200m BUS Cable 2x0,5mm

More details

Aurora hus på 150 – 180m2

42 565,50 kr

Instead of 43 058,00 kr

  • Installation Example of a Standard house of 150 – 180m2 Aurora

    Standart Hus 150-180 m2 - Smart house danmark

    Installation Example ...:


    All space is there an ignition light and an ignition to the connector contacts **

    In the living Room, there are 3 ignitions to light and 2 sockets
    In the kitchen, there are 2 ignitions to light and 1 ignition to electrical outlets.
    There are 2 ignitions of outside light *

    Set aside 4 ignitions with LED dimmer max 500W per. tændning.

    Total........:

    16stk. ignitions to electrical outlets

    20stk. ignitions to light

     

    The PIR sensor in the utility room, bath, in the rooms, wardrobe

    Located røgsensor in Pantry, walk and Lounge.

    That is outside of the PIR Sensor and Luxmeter

    .

     

    The Smart house components......:

    1. Web/Controller module

    1. Power supply Out 24 VDC / 2,5 Amp

    2 pcs. Master kanalgenerator

    8 pcs. Relæoutput modules 4 x 16A

    4. Dimmer 1 x 500W

    6 pcs. PIR sensor inside of the assembly

    1. LUX measures the outside mounting PIR Sensor and Luxmeter

    17stk. Press Aurora

    3 pcs. Smoke alarms

    200m BUS Cable 2x0,5mm

    REMEMBER the acquisition of Transparent Dupline module on the din rail (See Accessories) See example

    -

    -

    category_15.jpg

    APPENDIX thermal management................:

     

    There is mounted a temperature sensor with display in any room

    In the bath/toilet is fitted with a floor feel to ensure that the floor is always warm.

    Box by the guy with the governance of telestater (Valves)

    Recommended Floor sensor on my. all tiled floors with underfloor heating

     

    Smart-house components

    12stk Temperature display

    2pcs Floor sensor

    3pcs Solid state modules 4 outputs

    1pcs. External temperature sensor

     

     

    All rates are based on touch, PIR and temperaturdisplay in the Aurora series.

     

    **) Note.:

    • Cable 5 x 1,5mm2 have 2 ignitions, phase, zero and earth. ( Alternative can be used 7 x 1.5 mm2 - 4 ignitions, phase, zero and earth)

    • The bus pulled separately to all the pressure, pir etc.

    • The PIR sensor can also use the alarm, and Appendix Keypad and Siren

    • Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) Sx2WEB24
    • House Dimensions 44 mm x 44 mm
    • DIM.: 44 x 44 x 25.2 mm
    • Fits FUGA material
    • Power supply 24 VDC +/-20%

    Pack content

    Reviews

    Write a review

    Standart house at 150 – 180m2 Aurora series

    Standart house at 150 – 180m2 Aurora series

    Smart-house components:

    1. Web/Controller module
    2 pcs. Master kanalgenerator
    8 pcs. Relæoutput modules 4 x 16A
    4. Dimmer 1 x 500W
    6 pcs. PIR sensor inside of the assembly
    1. LUX meter sel. mounting the PIR Sensor and Luxmeter
    17stk. Press Aurora
    3 pcs. Smoke alarms
    200m BUS Cable 2x0,5mm

    Write a review

    3 other products in the same category:

    Related articles on blog

    No related articles on blog