Search on blog

Smart House UWP

Home

Home

Home

Home

Wireless Relay Output module

1

Wireless Relay Output module

By buying this product you can collect up to 8 loyalty points. Your cart will total 8 points that can be converted into a voucher of 4,00 kr.


• Wireless relay output module for building automation application
• Designed to fit into the eurobox
• Power supply 230 VAC
• Wireless transmission based on IEE802.15.4 @ 2.4 GHz
• Programmable routing function
• Load: 16A / 250VAC
• Withstands 130A inrush current
• Energy measurement: kWh
• Instantaneous variables readout: current, voltage, power

More details

SHDWRE16AE230

863,75 kr

  • • Wireless relay output module for building automation application
    • Designed to fit into the eurobox
    • Power supply 230 VAC
    • Wireless transmission based on IEE802.15.4 @ 2.4 GHz
    • Programmable routing function
    • Load: 16A / 250VAC
    • Withstands 130A inrush current
    • Energy measurement: kWh
    • Instantaneous variables readout: current, voltage, power

    Product Description

    The SHDWRE16AE230 is a wireless module with a single relay output and energy measurement. Single phase variables: VLn, A, W. Energy measurements: total kWh. The measured values are then logged in the SH2WEB24. It is part of the smart-house concept and can be used with all the functions supported by the smart-house controller. When an activation radio command is received, the output turns On and remains On until a deactivation radio command is recieved. It must always be coupled to an SH2WBU230 module.

    Mode of Operation

    The SHDWRE16AE230 is fully programmable via the Sx tool: the output can be individually associated to one of the functions supported by the smart-house system. Fail/safe condition The output status of the relays, when the wireless bus is not working, is programmed via the Sx tool and the user can choose between the following options: 1. Output always OFF 2. Output always On 3. The output maintains the status it had before the disconnection 4. The output runs in a cycle with programmable on and off periods: the user can set both the off and on period from 1 to 255 minutes. The factory setting is output always OFF. Coding/Addressing no addressing is needed since the module is provided with a specific identification number (SIn): the user has only to insert the SIn number in the Sx tool when creating the system configuration. Faulty lamps recognition If the measured current is lower than 20mA, the relay module gives a message of faulty load (the connected lamp might be broken). This information can be read by the Sx2WEB24, via smartdupline and then shown on the Sx Tool if connected to the Sx2WEB24. Energy measurement The electrical values measured by the SHDWRE16AE230 are: current, voltage, power, energy. These readouts are sent to the Sx2WEB24 and logged there, the instant values and the logged ones are accessible to the user by connecting to the webserver resident in the Sx2WEB24.

    • For Controller SH2WEB24 - SB2WEB24 - SA2WEB24
    • Address assignment Automatic: the controller recognises the module through the SIN (Specific Identification Number) Sx2WEB24
    • Weight 150 g
    • Forside IP50
    • Screw terminal IP 20
    • Beskyttelsesgrad 2 (IEC 60664-1, par. 4.6.2)
    • Operating temperature -20° til +50°C
    • Storage temperature -50° til +85°C
    • Humidity (non-condensing) 20 til 80% RH
    • House Dimensions 43 x 43 x 25 mm
    • Datasheet / Manual Download Data Sheet / Manual - click on the tab Download
    • Fits EURO Material and cans
    • Power supply 115/240 VAC ±10%
    • Rated operational power Senderækkevidde 100 m i fri luft

    Reviews

    Write a review

    Wireless Relay Output module

    Wireless Relay Output module

    • Wireless relay output module for building automation application
    • Designed to fit into the eurobox
    • Power supply 230 VAC
    • Wireless transmission based on IEE802.15.4 @ 2.4 GHz
    • Programmable routing function
    • Load: 16A / 250VAC
    • Withstands 130A inrush current
    • Energy measurement: kWh
    • Instantaneous variables readout: current, voltage, power

    Write a review

    6 other products in the same category: