Can you use alm. Power cable UTP around to all devices
In principle, yes, you should be sure to observe all respects for wires / cables with other voltages in the board and elsewhere. When using 0.25mm cable, for example, UTP cable, you should also be aware that all connections are 100% in order to prevent loose connections over time
If you choose any other cable, it can be pulled in the pipes along with the power lines or will it interfere with the signals on the bus
If you pull a cord or cable with Dupline / Smarthouse bus in pipes with other voltages, the cable / cable must comply with the insulation capability of the 300 / 500V inner conductor. Pulling the Dupline / Smart-house bus along with other voltages does not interfere with the bus.
We recommend using our special smart-house cord / cable for Smart-House installations.
It has an insulation capacity of 300 / 500V and is therefore approved to pull in tubes with other voltages. It is 0.5 square solid wire, which ensures better connections Special colors so it's easier to know and the risk of blending together is reduced
Cable Smarthouse = 200 meter roll with 2 X 0.5 conductors Cord Pink = 200 meter roll with 1 X 0.5 conductor Cord Violet = 200 meter roll with 1 X 0.5 conductor
Lots of possibilities Europadåsen has been on the market for 60 years in virtually all European countries except Switzerland, Italy, England and Denmark. The Europadåsen is now widely used in Denmark.
There are many advantages of Europadåsen that several hundred European manufacturers make installation equipment available. Also Smart House, Gira and Jung. There are eg electrical outlets, also Danish, EDB and antenna connectors and control systems that can not be mounted in the current Danish cans. The Europadåsen therefore provides a freedom in the electrical installation that has not previously existed in Denmark.
The Europadåsen is available as a front, mending and molding box, and it has many more options than the danish can. The Europadåsen future also ensures the electrical installation when in one, two or ten years, brand new electrical products come to the home - regardless of which supplier. New types of door communication, surge protection, automation and control etc. can be installed immediately - when a European box is in the wall or cable duct.
Many buildings in Denmark are already packed with Europadåser and Smart House Products.
With the Smart-House range, it's easy to find a suitable design - for example, frames come in many colors and materials, so you'll always find a frame that fits the new wallpaper or color of the living room. Or what about mounting a glass frame on the electrical outlet in the bathroom, or genuine stainless steel or aluminum where cleaning-friendly installations are needed in the kitchen, bathroom, utility room, hotel rooms, hospital and care sector? With more european boxes in the Danish walls / electrical installations, supply is increasing and competition is intensified, which means that consumers have much more to choose from.
For the electrician, it means that he gets significantly easier by offering the customer what he wants both technically and in design, thus achieving the order, and not as often as it is today, only to get the order on the price, but By offering exactly what the customer wants.
This advantage has the electrical installers had in all our neighbors for many years, thanks to the Europe Lock, which all European producers support.
Easy and quick assembly The electrician should know only a few goals when installing European boxes: The center distance from can to can is 71 mm Screw attachment for the insert is 60 mm The insertion pad is mounted in the drilled hole (82-84 mm) and is therefore fixed and centered without mud or foam, a clean assembly of less than 1/3 of the time normally used on mudguards in Denmark today. This assembly system is more than 20 years old and is used in most European countries.
Internationalization of electrical outlets After the government for about One year has been considering opening the Danish market for an international electrical outlet system, the Swedish Security Agency has announced that it will propose the introduction of the French / Belgian power outlet system from 1 July 2008. The problem is known: Almost all new electrical and electronic appliances are equipped with a CEE7 plug (Schuko and French / Belgian plug) according to European standards, and when plugged into the Danish three-pin electrical outlet - phase, zero and earth - There is no connection to earth. It believes many represent an ever greater security risk, so the new initiative is welcome. When using Gira sockets, it is optional for the developer to continue using the Danish outlet or the French / Belgian power outlet system when permitted.
This initiative from the authorities underpins the importance of the Europadåsen.
Problems with installing SH Tool ver 1.25 on windows 10, missing a file MSCOMNCTL.OCX
Yes, it is correct that MSCOMCTL.OCX is not installed as a standard on Windows 8 and 10
How to do it......:
Look for MSCOMNCTL.OCX in the following: C:Windows SysWOW64 directory Right click on Command Prompt and select Run As Administrator
Type the following CD C:Windows SysWOW64 directory Press Enter Next Type Regsvr32 MSCOMCTL.OCX Press Enter You should get a message "DllRegisterServer in mscomctl.ocx succeeded" Proceed with the installation
Ældre Controllere 1. generation - BH8-CTRLZ Smart House Dupline.............:
SH Tool ver 1.25 for BH8-CTRLZ, G3800 og ELKO 5500. EXE, 2,5mb