Room temperature regulator with display

B4X-TEMDIS

smart-house temperature controller with display
Designed to fit into the socket from Fuga, NICO en Bticino
Shows current room temperature
Turns heating and cooling on/off
Set the desired room temperature
The use of a floor sensor is optional

Aurora Temperature Controller

Supplied with pre-programmed address on I / O 2
Comes with both white and charcoal gray push button covers
Non-activated inputs and backlight indicated by orange light
Orange LED can be deactivated by an internal dip switch
Activated inputs are indicated by blue lights

AURORA Temp. display, 0 to 50ºC with / built-in adjustment. white and charcoal grey

Note: If a description of heating / cooling outputs is required,
refer to the instructions for smart-house controllers
BH8-CTRLX-230, BH8-CTRLZ and BH8-CTRLG. See section 2.3.5
Please note that the unit can be programmed for both cooling and heating,
but the desired function must be selected on the display. Before
For example, cooling control can be selected during summer and heat
control during the winter.
The temperature controller works with both floor sensor and Room sensor.
It is possible to enter the smart-house controller software to change
/ Program that senses are used (or both), together with the temperature
controller.