AJAX LIGHTCORE 1-PRESS

LightCore

• LightCore (1-press) — 76.3 × 72.3 × 29.2 mm
• LightCore (2-press) — 76.3 × 72.3 × 29.2 mm
• LightCore (2-way) — 76.3 × 72.3 × 29.2 mm

• Operation without a neutral wire
• LightSwitch only needs a live wire to operate.
• Power of the switched unit from 5 to 600 W

Non-contact touch panel
LightSwitch is activated when a hand comes as close as 15 mm from the panel.

Night Backlight: Optional, can be turned off in the Ajax app's device settings.

Protection against incompatible devices
Triggered if light units have insufficient power (up to 5 W). If protection is triggered, LightSwitch turns off power and sends a notification to Ajax apps. For low power lighting units, the kit includes a capacitor.
Recommendations
The device is designed for indoor installation only. A professional electrician should install a device.

Detection of communication loss from 36 seconds

The time to detect the communication loss depends on the jeweler (or jeweler/fibra) settings.

• Power supply voltage 230 V, 50 Hz
• Average consumption up to 200 mW
• Maximum power 600W For LightCore (1-press) and LightCore (2-way).
• 300W per segment For LightCore (2-press).
• Current protection more than 2.6 A
• If protection is triggered, LightSwitch turns off power and sends a notification to Ajax apps.
• Temperature protection more than +60°C
• If protection is triggered, LightSwitch turns off power and sends a notification to Ajax apps.
• Operating temperature range from –10°C to +40°C
• Operating humidity Up to 75% without condensation
• Protection class: IP20
• Form factor of switch European type (55)
• Weight relay
LightCore (1-press) – 45.95g
LightCore (2-press) – 53.9g
LightCore (2-way) — 48.34g