SH2D500W230

This 500 W universal dimmer is designed for DIN rail mounting

and is 2 DIN wide. The dimmer is suitable for dimming ohmic, inductive and capacitive loads and LED lamps (see table "LED lamps").

The maximum connected load is 500 W and the load depends on the temperature: the reduction is described according to the development in the “Load reduction curve”.

The attenuator automatically detects whether the connected load is ohmic, capacitive or inductive. If an LED lamp is to be used, however, the user must choose the correct curve as described below.

The attenuator is equipped with memory for the last selected scenario.

The technology used makes it possible to protect the dimmer

electrical against short circuit, overload and excessive temperature. Thank you

being the internal bus, you can easily connect several dimmers next to each other without using cables to the Dupline bus (see “connection diagram”).

In addition, integrating the heatsinks allows several connected dimmers to be installed without reducing the load

Due to rising temperature.